Air Compressor Improve – Improve Tank Capability!

Small compressors are nice for a lot of makes use of — since usually they’re light-weight, transportable, and run off of normal wall energy.

However, the place there are optimistic options, there are all the time negatives.  Inevitably, you’ll run into conditions the place your in any other case helpful compressor simply wont work (or work effectively) attributable to an absence of a ample air provide.  One factor that instantly involves thoughts will likely be with some excessive CFM use instruments similar to an influence wrench.  The compressor simply cant produce sufficient air to run most of them & you may be caught doing issues (like rotating tires) by hand.

Making an attempt to justify the improve value to go out of your stacked or pancake compressor — as much as a full dimension unit — simply isnt life like in lots of circumstances.  That might simply be one other $200-$300, and for the DIYer/Home-owner who simply does minimal automobile upkeep — it positively doesn’t make sense.

One thing to think about can be so as to add an auxiliary tank (in-line) which can drastically improve the storage capability of the compressed air, and can assist you to simply full duties that the compressor alongside simply can not do.  This may be achieved with a brief checklist of things out of your native dwelling middle, and with minimal effort will be assembled in a couple of minutes.

What you’ll need are the next gadgets :

• Moveable Air Tank (125 psi minimal score)
• 1/2″ to 1/4″ NPT Bushing
• 1/4″ T-fitting
• 1/4″ Coupler
• 1/4″ Plug
• 3′ part of “lead hose”
• Thread Tape

Begin out by eradicating the whole (manufacturing unit put in) air valve meeting from the transportable air tank.  Normally this can embrace a hose, valve, and strain gauge.  Sadly the inventory valve meeting can’t be re-used for our construct, because the flow-rate can be very low because of the extraordinarily small gap feeding by means of the valve.  In comparison with a typical 1/4″ NPT plug — the distinction could be very noticeable.

Subsequent you’ll need to put in the 1/2″ to 1/4″ bushing into the tank opening, the t-fitting will screw into that, after which on both aspect of the t-fitting would be the coupler & lead hose.  On the alternative aspect of the lead hose, set up the 1/4″ plug.  Now you’re prepared to attach the whole lot as much as the primary compressor and strain take a look at it for leaks.  Remember to assemble every bit with thread tape — in any other case it won’t have a decent seal.  Even be aware to not over-tighten, or the skinny brass fittings will crack or cut up!

Connecting the Husky Silent Movement compressor to the auxiliary tank has now greater than doubled the storage capability — growing from the inventory 4.6 gallons, to now 9.6 gallons (because of the 5 gallon further tank).  This can differ for you — relying in your compressor tank dimension & auxiliary tank dimension.

Operating each situations by means of a lug nut take a look at, the outcomes communicate for themselves.  Our take a look at automobile is a Honda Pilot, with tires that have been final rotated 4 months in the past (10,000 miles).  We’re utilizing a Chicago Pneumatic stubby influence wrench, 50′ of three/8″ ID air line, and 1/4″ NPT fittings.

• Check #1 (4.6 gallon compressor ONLY) = 2nd lug nut the compressor kicked on attributable to low strain.
• Check #2 (9.6 gallon compressor/tank combo) = fifth lug nut totally eliminated & compressor kicked on as tanks equalized in strain.  The influence additionally appeared to have extra energy (we assume attributable to greater move fittings popping out of the auxiliary tank VS the restrictions on the compressor solely).

So, confirmed in testing is the truth that extra air = extra work carried out.  Remember that the draw back to this will likely be double cycle instances for the compressor.  This is because of it having to replenish it’s principal tank(s) & additionally the auxiliary tank -VS- solely filling up it’s principal tank.  However, for the occasional consumer that simply wants extra air, that is completely the way in which to go.

We ended up shopping for the tank, fittings, and lead hose for beneath $30 regionally — and to purchase a ten gallon compressor would have been many instances that.  This lets you have an even bigger compressor when wanted, after which use it as you usually would the remainder of the time!

Get a Moveable Air Tank at Amazon by clicking right here!